Skip to content

Hypernode features

Which Hypernode features would you like to see?

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

48 results found

  1. Disable access to phpmyadmin by default

    When requesting a new Hypernode, phpmyadmin comes pre-installed and is directly accessible via example.hypernode.io/phpmyadmin/ without any whitelisting making it a target for bruteforcing.

    We do not use phpmyadmin, meaning that it requires us to disable access to phpmyadmin via nginx for each new hypernode we request. Something that is easily overseen.

    For us, ideal is to have its access blocked by default. Even better would be if we can toggle this in the Hypernode panel.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  2. Allow Google PageSpeed Insights on development-nodes

    During development of a new project, we want to check how Google PageSpeed Insight perceives a yet to go-live environment. Due to the default http authentication the PageSpeed Insights scan cannot be completed. Whitelisting the useragent for Google Pagespeed from http authentication is, apparently, not possible.

    Currently we need to move the Hypernode into production mode before we can run the scan, but that's a bit cumbersome and makes the environment open to the public (while we're still in development phase).

    Ofcourse we can use Google Lightspeed, but this gives us mixed-results. Having the possibility to whitelist the Google PageSpeed…

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  3. Easily manage SSH key access

    Allow to easily access SSH key access in the control panel, like the way it used to work in the old control panel.

    Allow for easy enabled/disabling of an SSH key for any Hypernode, without having to remove the key all together. This is sort of possible on the Hypernode itself right now, but this should also be available for non-technical users through the control panel.

    In the old control panel it was possible to just select which SSH keys should have access to which Hypernode and this worked perfectly.

    5 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    1 comment  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  4. Mount S3 bucket as a file storage folder with s3fs

    To simplify integration with AWS S3 buckets, it would be very usefull to be able to use s3fs. It allows you to connect your media folders to an S3 bucket without needing any further Magento/Akeneo/etc... platform configurations.

    Example setup https://upcloud.com/resources/tutorials/mount-object-storage-cloud-server-s3fs-fuse

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  5. Support for Cloudflare Railgun

    Hypernode is very flexible and powerful with Cloudflare, especially for security, however we would like to use Railgun to improve the performance too.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  6. Support For Gitlab Runner

    We want to integrate CI/CD into Hypernode using Gitlab.
    With the possibility of installing a gitlab runner directly on the Hypernode we are able to run our integration tests and deploy directly on the Hypernode server with Shell execution

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  7. honoreren van bepaalde sql settings in my.cnf

    het zou fijn zijn als je in de /data/web/my.cnf sql settings zet soals slow log time dat deze ook door de node gehonoreerd worden.
    dit kom weg uit de hypernode automatic mail :
    Extreme logfiles van MySQL

    waarin de index van de customer_price _table ongeveer 4.3 seconden duurt en daar krijg ik dus best wat mail van.

    er is nu geen manier voor gebruiker om iets van mysql te dresseren .

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  8. Install Cronitor by default on hypernodes

    Make sure Cronitor is installed by default. Cronitor is a cronjob monitoring tool. https://cronitor.io/docs/using-cronitor-cli%23installation

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    1 comment  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  9. add Node version 12 and 14 to hypernode-systemctl settings nodejs_version

    Add Node version 12 and 14 to hypernode-systemctl settings nodejs_version.
    At the moment it is possible to use version 8, 10, 16 and 18.

    Snowdog theme use version 12 or 14 for frontools.

    Now it breaks on deployment, because deployer use another node version then is set at the the .profile of the app user

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  10. Add an extra deploy environment (INT/ACC/PRD) - so 3 instead of 2.

    We currently have two environments on your servers.
    Live and Staging. (:8443)

    However, we use three "pipelines":
    - master (Production; live)
    - acceptance ("prelive") (mirror of production environment)
    - integration / Develop (staging)

    1) Please make sure we can easily have that other environment where we can deploy the ACC --> so 3 instead of 1.

    2) The staging is now always running on port :8443.
    Please make it possible to use subdomains instead.
    I suggest:
    - www (production; live)
    - pre-live (acc)
    - staging (int)

    Jos Jonkeren

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  11. Enable "hypernode:crack:admin-passwords" for Magento 2

    Hypernode provides a cli command to find weak admin password for Magento 1.

    hypernode:crack:admin-passwords

    It would be nice to make this feature available for Magento 2

    9 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    1 comment  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  12. Restart PM2 after Server Reboot

    Restart / resurrect PM2 properly after server Reboot. This should be done by default and not be dependant on a custom cronjob.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  13. PHP Preloading

    We would like to take advantage of PHP Preloading which was introduced in PHP 7.4.0. See official documentation https://www.php.net/manual/en/opcache.preloading.php

    This option sufficiently improves the performance. https://gist.github.com/kirmorozov/979986508675c5c65a5c51e58d4fb2fa

    I would consider allowing developers to use Preloading a MUSH-HAVE option like OPCache is.

    All we need is a an option to set the path to the custom preloading PHP script.

    Thank you

    6 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  14. Blacklist IP addresses based on AbuseIPDB

    Instead of blocking a whole country I personally would like to see just blocking several IPs based on an already filled blacklist form AbuseIPDB.
    They even have an ip which you could use to generate a server.malicious_ips nginx file on every server.

    Thanks!

    57 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    1 comment  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  15. Garbage Collector

    Upon testing Blackfire tool, it was "recomended" to have the garbage collector disable (zend.enable_gc = off)

    It would be nice to have a feature to enable/disable this feature

    Regards

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  16. Ability to use latest (managed) Magerun version

    Since https://changelog.hypernode.com/changelog/release-6828-pinning-magerun-2-to-3-2-0/, the n98-magerun2 version has been pinned to 3.2.0. There have been many releases ever since: https://github.com/netz98/n98-magerun2/releases.

    The pindown has been done to make sure n98-mageurn2 can be used on PHP 7.1/Magento 2.2 environments.

    I'd like to tell my Hypernode to use the latest n98-magerun2 version, using hypernode-systemctl. That way, we can have the latest version, while the tool does not break for all PHP 7.1/Magento 2.2 Hypernode environments.

    I know we can install the latest version ourselves in ~/.local/bin, but then we have to:
    1). Keep the tool up to date manually.
    2). Change all paths…

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    1 comment  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  17. MySQL replication (source to replica)

    Setup a source / replica situation for our customers.
    Hypernode could set this up as a payed addition.

    We can have
    - dumped backups (in favor of snapshots)
    - dumps we can use for development/staging environments
    - dumps won't affect performance production servers
    - implemented in MySQL, so you don't have to do it yourself
    - we can event start thinking about a failover system
    - marketing companies doing statistical queries can do this safely on the read only slave environment

    21 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  18. Keep Datadog installation unaffected after system upgrades

    At TechTribe we make use of Datadog for system monitoring. However, after each system upgrade Datadog need to be reinstalled. For our organization, this means that we have to contact the support team, and we cannot access Datadog for a certain period.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    under review  ·  0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  19. Add more history to MageReport charts

    At the moment, the MageReport charts only go back 7 days. When troubleshooting problems, it's often required to go back further in time.
    Disk space, CPU usage, PHP requests, ...

    24 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    under review  ·  0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  20. Add functionality to specify the return-path for multiple stores, instead of default "noreply@hypernode.io"

    Add functionality to specify the return-path for multiple stores, instead of default "noreply@hypernode.io"

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    under review  ·  0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
2
  • Don't see your idea?

Hypernode features

Categories

Feedback and Knowledge Base

(thinking…)